مقدمات الشركة
منزل > بطاقة > تقرير اختبار آلة بثق الورقة EPE

تقرير اختبار آلة بثق الورقة EPE

EPE Sheet Extruder Machine Testing Report This report summarizes the testing process and performance evaluation of an EPE (Expanded Polyethylene) sheet extruder machine conducted after installation and commissioning. The purpose of the test was to verify mechanical integrity, process stability, product quality, safety functions, and overall production capability in accordance with the technical specifications and the agreed operating parameters.Before production trials, a comprehensive pre‑start inspection was carried out. All mechanical components, including extruder screw and barrel, gear box, drive motor, heating zones, die head, cooling system, rollers, and take‑off unit, were checked for correct installation and secure fastening. Electrical wiring, control cabinets, sensors, and emergency stop circuits were inspected. The operator panel and human‑machine interface were powered up to confirm correct display, parameter setting, and alarm indication.Dry‑run testing was performed without raw material to verify rotation direction, speed adjustment, temperature control, and interlock functions. Each heating zone was gradually heated to the specified setpoints and monitored for temperature accuracy and stability. Safety devices such as emergency stops, overload protection, guards, and limit switches were tested and confirmed to be effective.After confirming the readiness of the system, production tests were conducted using standard EPE raw material. The extruder was started with a low screw speed, and process parameters such as melt temperature, barrel and die temperatures, screw speed, cooling water flow, and line speed were adjusted progressively. The aim was to achieve stable foaming, uniform cell structure, and consistent sheet thickness and width.Several production runs were carried out at different target thicknesses and densities. Samples were collected at regular intervals to evaluate dimensional accuracy, surface quality, appearance, density, compression performance, and recovery. The sheet surface was visually inspected for defects such as holes, cracks, uneven foaming, streaks, or color variation. Measurements confirmed that the thickness tolerance and width deviation were within the specified range after fine‑tuning of the die gap and take‑off speed.The control system responded reliably to parameter changes and maintained stable operation once suitable settings were established. Temperature fluctuation remained within acceptable limits. No abnormal vibration, noise, or leakage was detected during continuous operation. The average output met the planned capacity, and the machine showed the ability to run at higher speeds after optimization.At the end of testing, the machine was shut down following standard procedures, and the barrel and die were checked for material residue or damage. All test records, parameter settings, and sample evaluations were documented for future reference. Based on the results, the EPE sheet extruder machine is considered to have passed the performance and safety tests and is ready for regular production under the tested conditions.

نتاج

تصنيف:
لا توجد نتائج بحث!

أخبار

تصنيف:

حالة

تصنيف:
لا توجد نتائج بحث!

فيديو

تصنيف:
لا توجد نتائج بحث!

تحميل

تصنيف:
لا توجد نتائج بحث!

تجنيد

تصنيف:
لا توجد نتائج بحث!

المنتجات الموصى بها

لا توجد نتائج بحث!
اتصل بنا

الهاتف:+86 15253598306

بريد إلكتروني:sales@fushijixie.cn

عنوان:منطقة لانجاو الصناعية، مدينة لونغ كو، مقاطعة شاندونغ، 265709، الصين

الخط الساخن للخدمة الوطنية

+86 15253598306

حقوق الطبع والنشر © Longkou Fushi Packing Machinery Co., LTD. جميع الحقوق محفوظة.   خريطة الموقع

يستخدم هذا الموقع ملفات تعريف الارتباط لضمان حصولك على أفضل تجربة على موقعنا.

يقبل يرفض